Transition Networks CPSMP-205, User Manual

Page: 3 / 14

Transition Networks CPSMP-205 User Guide
Power supply component identification
See Figure 1 below:

Fuse Holder ( fuse inline AC )

Instant failover board (switches to redundant ( second ) power supply instantly)

Two-position configuration switch sets power-supply functionality

Power Supply

Power ON LED ( lit when power is ON )

ON/OFF switch, when in the ON position power is supplied to the PointSystem chassis

Handle for installing and removing the power supply

Fan (exhausts warn air from the power supply)

AC power inlet ( receptacle for external AC power )
Figure 1: Power Supply Components
Notices

The CPSMP-205 AC power supply must be installed by qualified technical personnel only.
Transition Networks assumes no responsibility for the improper installation, set up, or use of this
power supply.

The information in this user’s guide is subject to change. For the most up-to-date information, see
this same user’s guide online at
www.transition.com .
33xxx Rev. H http://www.transition.com/ Page 3 of 14