CPSMP-200
10
Tech Support:
1-800-260-1312
-- International:
00-1-952-941-7600
-- (24 hours)
Troubleshooting
If the power supply module fails, isolate and correct the failure by determining
the answers to the following questions and then taking the indicated action:
1.
Is the Power LED on the CPSMP-200 power supply module
illuminated?
NO
•
Is the power supply module inserted properly into the chassis?
•
Is the power supply module properly connected to the external
power source?
•
Does the external power source provide power?
•
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
•
Proceed to step 2.
2.
Is the fuse on the CPSMP-200 power supply intact?
NO
•
CAUTION: See the “
Replace the Fuse
” section (page 8) for the
proper method for replacing the fuse to the power supply module.
•
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
•
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
-- Click the
“Transition Now”
link for a live Web chat.
11
Contact Us
Technical Support
Technical support is available 24 hours a day.
US and Canada:
1-800-260-1312
International:
00-1-952-941-7600
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Log onto
www.transition.com
and click the
Transition Now
link.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
Log onto
www.transition.com
and click the
Learning Center
link.
Ask a question anytime by sending an e-mail to our technical support staff.
Address
Transition Networks; 6475 City West Parkway; Minneapolis, MN 55344, USA
telephone: 952-941-7600; toll free: 800-526-9267; fax: 952-941-2322
Declaration of Conformity
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model:
CPSMP-200 Redundant Power Supply 120/240 VAC
Part Number(s):
CPSMP-200
Regulation:
EMC Directive 89/336/EEC
Purpose: To declare that the
CPSMP-200
to which this declaration refers is in
conformity with the following standards.
CISPR 22:1997+A1:2000; EN 55022:1998 + A1:2000 Class A&B; EN 55024:1998;
FCC Part 15 Subpart B; EN61000-3-2:1995+A14:2000; EN61000-3-3:1995
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
_July 8, 2000_____
Stephen Anderson, Vice-President of Engineering
Date
