14
CAPTF33xx-1xx
24-hour Technical Support:
1-800-260-1312
-- International:
00-1-952-941-7600
Consumer Information
ACTA Compliance
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a
label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
Plug and Jack
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Ringer Equivalence Number
The Ringer Equivalence Number (REN) (listed on the label on the front of the device) is used
to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of the RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as determined by the total
RENs, contact the local telephone company.
Harm to the Telephone Network
If the
CAPTF33xx-1xx
causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. But if
advance notice is not practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
Changes to the Telephone Company’s Network
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the
CAPTF33xx-1xx
. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
Problems with the Equipment
If trouble is experienced with the
CAPTF33xx-1xx
, for repair or warranty information, please
contact Transition Networks at 800-260-1312 x 200 or at www.transition.com. If the
equipment is causing harm to the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.
Repairs to the Equipment
Aside from the jumper settings (described on page 5), the
CAPTF33xx-1xx
is not intended to
be serviced by the user. If the equipment requires repair, contact Transition Networks at 800-
260-1312 x200 or at www.transition.com.
Party Lines
Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission, or corporation commission for information.
Alarm Dialing Equipment
If your home has specially wired alarm equipment connected to the telephone line, ensure
the installation of the
CAPTF33xx-1xx
does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or a
qualified installer.
15
Select the “
Transition Now
” Link for a Live Web Chat
Contact Us
Technical Support
Technical support is available 24 hours a day.
US and Canada:
1-800-260-1312
International:
00-1-952-941-7600
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Log onto
www.transition.com
and click the
Transition Now
link.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
Log onto
www.transition.com
and click the
Learning Center
link.
Ask a question anytime by sending an e-mail to our technical support staff.
Address
Transition Networks
6475 City West Parkway
Minneapolis, MN 55344, USA
telephone:
952-941-7600
toll free:
800-526-9267
fax:
952-941-2322
Declaration of Conformity
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model:
CAPTF33xx-1xx Series Media Converters
Part Number(s):
CAPTF3311-100, CAPTF3311-110, CAPTF3313-100, CAPTF3313-110,
CAPTF3314-100, CAPTF3314-110, CAPTF3315-100, CAPTF3315-110,
CAPTF3329-100, CAPTF3329-110, CAPTF3329-101, CAPTF3329-111,
CAPTF3329-102, CAPTF3329-112, CAPTF3329-103, CAPTF3329-113
Regulation:
EMC Directive 89/336/EEC
Purpose: To declare that the
CAPTF33xx-1xx
to which this declaration refers is in
conformity with the following standards.
CISPR 22:1997+A1:2000; EN 55022:1998+A1:2000 Class A; 55024:1998; FCC Part 15
Subpart B; TBR 21:1998; CS 03; TIA-968; 21 CFR Subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s)
and Standard(s).
_February 17, 2003_____
Stephen Anderson, Vice-President of Engineering
Date
