Transition Networks
C4110 Install Guide
33572 Rev. B
https://www.transition.com/
Page 25 of 33
Technical Specifications
Standards:
IEEE802.3ae / ITU.G.709 / SFF8431
Data Rate
10 Gbps
Dimensions
Width: 0.86” [21.85 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86.36 mm]
Power Source
12VDC from ION backplane
Power Consumption
4.2W (350mA @12V)
Environment
See ION chassis specifications
Operating Temperature 0 to 50 degrees C
Storage Temperature
-40 to 85 degrees C
Altitude
0-10,000 feet
Operating Humidity
5% to 95% (non-condensing)
Shipping Weight
1 lb. (0.45 Kg.)
MTBF
Greater than 250,000 hours (MIL-HDBK-217F)
Greater than 687,000 hours (Bellcore)
Regulatory Compliance for:
Emission
FCC Class A; EN55022 Class A
Immunity
EN55024
Safety Compliance
CE Mark
Warranty:
Lifetime
Max. Frame Size:
16384 bytes jumbo frame support
The information in this user’s guide is subject to change. For the latest information, see the online user’s
guide at:
https://www.transition.com
.
WARNING: Visible and invisible laser radiation when open. DO NOT stare into the beam or view the
beam directly with optical instruments. Failure to observe this warning could result in an eye injury or
blindness.
WARNING: Use of controls, adjustments or the performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Defaults
After you configure the C4110 and insert it into ION chassis, it will start up and run automatically using its
defaults. The C4110 initialization default values are shown below.
Parameter
Default Value
Property
Configuration Mode
Software (SW) mode
Read only
Device Description
(blank)
Read & Write
Data Rate Retiming
10GE
Read & Write
Fiber Port
Link Status
Down
Read only
You can change the default configuration via the ION Web GUI, the ION CLI (Command Line Interface),
or via Focal Point 3.0.
