Notice of Safety and Use
1. Read this manual carefully before use.
2. The device must be properly grounded when in use.
3. This device uses high voltage. Do not touch electrodes while in use. Do
not open bar without authorization. Internal maintenance and repair
must be carried out by professionals.
4. Do not use this device in an environment where the humidity is greater
than 75%
5. Do not use this device in combustible and explosive environments.
6. Electrodes must not come in contact with metal conductors.
7. Please contact Transforming Technologies Customer Service for repair
information.
Installation
1. Choose optimal location for ionization and mount the bar and power
supply. Bar should be mounted perpendicular to the charged surface.
2. Slide the EZ mount clips onto the ionizer and twist. Tighten with an
Allen wrench to secure position.
3. Insert the power cord in the port labels "Power".
4. Connect the air source to the bar via the quick release valve.
5. Turn on the power switch and adjust air pressure to proper levels with
needle valve.
Positioning
