6
ENGLISH
QL045
Installation
INSTALLING THE FAUCET
Sprayer
head
Gooseneck
Faucet body
Faucet handle
Gasket
Metal washer
Threaded section
Retaining ring
Screws
Spray Hose
Main Water
Supply Outlet
1 . Carefully take out all the parts of the faucet assembly (B) . The faucet
is pre-assembled, except for the sprayer head .
2 . Take the retaining nut, metal washer, and gasket off of the faucet
body .
3 . Place the faucet body carefully through the hole in the sink (E) .
4 . From underneath, slide the gasket, metal washer and retaining nut
over the supply lines and up to the exposed threaded section of the
faucet . Tighten the retaining nut by hand until it is snug . Using a
wrench or pliers, tighten the assembly .
5 . Gently tighten the two screws on the retaining nut . Do not over
tighten .
6 . Screw the sprayer head onto the gooseneck .
7 . Connect the water supply lines (not supplied) to the faucet .
8 . Use two wrenches to tighten the two ends together . Please note,
tightening the fittings with a single wrench may damage the faucet
and void the warranty . .
