CONGLOMKB .COM
Please contact
cs@conglomkb .com
or
1-877-333-0098
for further assistance .
ENGLISH
7
Installation (continued)
-
Fully retract the sprayer hose (9). Install the
counterweight (B) about 2 in. (50 mm) from
the bottom on the side closest to the sprayer
head . There should be no slack in the hose
and it should retract freely .
2 in (50 mm)
Counterweight (B)
9
Fig . 4
CAUTION:
To avoid risk of property damage, follow these instructions closely . Failure
to follow these instructions may result in property damage caused by leaks at these
connections .
Do not use thread seal tape or other sealants on these water line connections .
-
Ensure all fittings and end connections are
free of debris .
-
Loop supply lines (11) if they are too long.
-
Secure metal nuts (12) of the supply lines
(11) to corresponding supply valves. Tighten
the nuts (12) by hand until they are snug.
Then tighten the nuts (12) with a wrench.
Supply Line
(Red Markings)
Supply Line
(Blue Markings)
Cold Water
Supply Valve
Hot Water
Supply Valve
11
12
13
Fig . 5
