Quick Start
To attach the TR-LCD1900-OCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2. Connect the power cord for your monitor to the power port on the back of the monitor . Plug the power
cord for the monitor into a nearby outlet.
3-1. Using the D-sub (analog) connector on the video card:
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor .
3-2. Using the DVI (digital) connector on the video card:
Connect the DVI cable to the DVI port on the back of your monitor .
4. Connect to a Macintosh:
Use the D-sub connection cable.
(An older model Macintosh may require a special Mac adaptor).
5. Turn on your computer and monitor. If your monitor displays an image, inst allation is complete.
NOTES:
•
You may get a blank screen depending on the type of video card you are using, if you connect
simultaneously both D-sub and DVI cables to one computer.
•
If the monitor is connected properly using the DVI connector but you get a blank or fuzzy
screen, check to see if monitor status is set to analog. Press Source button to have the monitor
double-check the input signal source.
3
TR-LCD1900-OCD User Manual
