1
Introduction
The Encompass 1i handheld reader combines the TransCore
IP30 TC2 RFID scan handle and the Intermec model CN70e
mobile computer. This document describes procedures to set up
and read/verify tags using TransCore’s Encompass 1i handheld
reader.
Please refer to the following documents for comprehensive
information about the IP30 TC2 RFID scan handle and the
Intermec model CN70e mobile computer:
•
IP30 handheld RFID reader user guide
•
Microsoft Windows embedded handheld 6.5 (CN70e)
user’s manual
Both of these documents are available online at
www.intermec.com
.
Before You Begin
TransCore’s Encompass 1i handheld reader is designed to read
from TransCore eGo
1
Plus sticker or license plate tags, eGo
®
tags, ATA and/or Wiegand tags.
Handheld Reader Setup Instructions
To set up the basic Encompass 1i handheld reader, you will need
the following items:
•
TransCore IP30 TC2 RFID scan handle with battery
•
Intermec CN70e mobile computer
•
Tagreader demo software program preloaded on the
Intermec CN70e mobile computer
•
IP30 TC2 scan handle battery charger with universal AC
adapter and power cord
•
CN70e mobile computer single dock/charging station with
universal AC adapter and power cord
1
eGo tags are fully compliant with the American National Standards Institute NCITS 256-2001 and
International Organization for Standardization 18000-6B standards.
