3.1.4 RESETTING THE SYSTEM
Warning:
This will reset the controller to its factory defaults.
This will erase all programs and settings.
Action:
1) Turn off the unit.
2) Press and hold
BANK UP
and
AUTO/DEL.
3) Turn on power to the unit
(while still holding
BANK UP
and
AUTO/DEL
).
3.1.5 COPY Fixture
Example: Copying Fixture 1 into Fixture 2
Action:
1) Press and hold
FIXTURE
button # 1.
2) While holding button # 1 press
FIXTURE
button # 2.
3) Release
FIXTURE
button # 1 first before
releasing
FIXTURE
button # 2.
4) All
FIXTURE LED
indicators will flash to
confirm successful copy.
3.1.6 FADE TIME ASSIGN
You can choose whether the controllers fade time during scene execution is implemented to all output
channels or only to the Pan & Tilt movement channels. This is relevant because often you will want gobos
and colours to change quickly while not affecting the movement of the light.
Action:
1) Turn OFF the controller.
2) Hold the BLACKOUT and
TAPSYNC
DISPLAY
buttons simultaneously.
3) Turn
ON
the controller.
4) Press the
TAPSYNC DISPLAY
button to toggle
between the two modes. Either all channels (A)
or select channel Pan & Tilt only (P)
5) Press
BLACKOUT
and
TAPSYNC DISPLAY
to save settings. All LEDs will blink to confirm.
3.2 Operation
3.2.1 MANUAL MODE
The manual mode allows direct control of all fixtures. You are able to move them and change attributes by
using the channel faders.
Action:
1) Press the
AUTO DEL
button repeatedly until
neither music trigger or auto trigger indicators
are lit.
2) Select a FIXTURE button.
3) Move faders to change fixture attributes.
TAPSYNC DISPLAY
button: Press to toggle
the output indicator on the LED display between
DMX values (0-255) and percentage (0-100)
Notes:
To save time, you can copy the settings of one
Scanner button to another.
Notes:
Notes:
A: All channels P: Only Pan & Tilt
Notes:
All changes made while in Manual Mode are
temporary and will not be recorded.
8
Summary of Contents for BOTE35
Page 20: ......
