Transcension BOTE35, Manual

Page: 14 / 20

3.4.9 DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes and
programme banks will be preserved.
Action:
1) Turn OFF the controller.
2) Press and hold the BANK DOWN button and
the AUTO DEL button while turning ON
the controller.
3) All LEDs will blink.
3.5 Scene Programming (Steps)
3.5.1 INSERT A SCENE
Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Press the desired CHASE button.
3) Press the TAPSYNC DISPLAY to switch
the LED display to steps view.
4) Use the BANK UP/DOWN buttons to
navigate steps and locate the insert point
of the new scene. The display will read
the step number.
5) Press ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate
the SCENE.
7) Press the
SCENE
button that corresponds
to the scene to be inserted.
8) Press ADD button to insert the scene.
All LEDs will blink.
3.5.2 COPY A SCENE
Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Select the BANK that contains the scene to be
copied using the BANK UP/DOWN buttons.
3) Press the SCENE button that corresponds to
the scene to be copied.
4) Press ADD button to copy the scene.
5) Select the destination BANK that contains the
scene memory to record into using the
BANK UP/DOWN buttons.
6) Press the desired SCENE button to
complete copy. All LEDs will blink.
Notes:
Notes:
I.e. To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display
reads STEP05.
Notes:
13