Transcension Art-Net N4 MKII User Manual Download Page 4

 

2. General Instructions 

Please read the user manual carefully, as it includes important information 

regarding details of operation, maintenance, and technical data. Keep this 

manual with the unit for future consultation. 

 

WARNINGS! 

 

DO NOT make any inflammable liquids, water or metal objects enter the unit. 

 

Should any liquid be spilled on the unit, DISCONNECT the power immediately. 

 

STOP using the unit immediately in the event of serious operation problems and 

contact with your local dealer for a check or contact us directly. 

 

DO NOT open the unit. There are no user serviceable parts inside. 

 

NEVER try to repair the unit by yourself. Repairs by unqualified people could cause 

damage or faulty operation.   

 

This fixture is for professional use only - it is not designed for or suitable for 

household use. The product must be installed by a qualified technician in 

accordance with local territory regulations. The safety of the installation is the 

responsibility of the installer. The fixture presents risks of severe injury or death 

due to fire hazards, electric shock and falls. 

 

WARRANTY: One year from date of purchase. 

 

CAUTIONS! 

 

After having removed the packaging, please check that the unit is NOT damaged in 

any way. If in doubt, DON'T use it and contact an authorised dealer. 

 

Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left 

within children's reach, as it can be dangerous. 

 

This unit must only be operated by adults. DO NOT allow children to tamper or play 

with this unit. 

 

DO NOT dismantle or modify the unit unless suitably qualified to do so. 

 

NEVER use the unit under the following conditions: 

In places subject to excessive humidity. 

In places subject to vibrations or bumps. 

In places with a temperature of over 45°C/113°F or less than 2°C/35.6°F. 

Protect the unit from excessive dryness or humidity (ideal conditions are   

between 35% and 80%). 

Summary of Contents for Art-Net N4 MKII

















Reviews: