10
2) 1-4 DMX output
Any of the port 1-4 also can be set as Output status. Upon the port has been
set as Output status, there are
LTP, HTP, zero
,
single
and
RDM
these 5
modes can be selected.
Zero
means the port output should be
“0’;
Single
means this port will only output one universal.
LTP
means this port will output the latter one between the universal of principle
and secondly. The unit will compare the two universal and resend the later one
to the network.
Please note that in the LTP mode, you should ensure the Resend option
is not at the status of Disabled. Or it won’t resend the data to the network.