BIOS SETUP
39
- Any Key : Press any key to Power On the system.
- Button only : Power On only by pushing the button on the case (Default)- Keyboard 98 :
You can Power On the system by pushing the Power-On key of Keyboard 98.
•
•
•
•
•
KB Power On Password
Enter the Power On Passward here.
Activated only when Password item is selected
in the Power On Function Menu.
NOTE: If you want to use this function, please make sure that the KB-AWK jumper
is set to Enabled.
•
•
•
•
•
Hot Key Power On
Choose [CTRL] +[ F1] ~ [F10] as a hot key to Power On the system.
Activated only when
Hot Key is selected on the Power On Function Menu.
•
•
•
•
•
Onboard FDC Controller
You can use this function to enable or disable the onboard FDC controller.
•
•
•
•
•
Onboard Serial Port 1 / Port 2
Select an address and the corresponding interrupt for each of the first and second serial
ports. The Choices: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, and
Auto.
The second serial port shares the resources (address and IRQ) with IrDA.
•
•
•
•
•
UART Mode Select
Choose the right type of infrared device:
- Normal : Normal operation
- IrDA : IrDA compliant serial infrared port
- ASKIR : Amplitude Shift Keyed Infrared Port
•
•
•
•
•
RxD, TxD Active
Consult your IR peripheral documentation to select the combination of RxD and TxD.
•
•
•
•
•
IR Transmission Delay
Consult your IR peripheral documentation to select Enabled or Disabled of the IR
Transmission Delay.
•
•
•
•
•
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer)
port.
The choices: 378/IRQ7, 278/IRQ5, 3BC/IRQ7 and Disabled.