33
BIOS SETUP
•
AGP & P2P Bridge Control
This submenu controls the AGP related register settings.
•
AGP Aperture Size
Memory-mapped graphics data structures can reside in a Graphics Aperture. This item
lets you determine the effective size of the AGP Graphics Aperture, which is a memory
area used to transfer data to/from the AGP card. We suggest you leave this field on the
default setting.
•
AGP Mode
This item configures the chipset’s fastest AGP Mode. You can set this field to “2” to force
a 4X AGP card to run at 2X speed.
•
AGP Driving Control
This function allows you to adjust the AGP driving force. Choosing ‘Manual’ allows you
set the AGP Driving Value in the next field. We recommend that you set this field to
“Auto” to avoid any errors in the system settings.
•
AGP Driving Value
This field allows you to adjust the AGP driving force (from OO~FF).
•
AGP Master 1 WS Write
Selecting “Enabled” will implement a single delay when writing to the AGP Bus. By
default, two wait states are used by the system, allowing for greater stability.
