•
•
•
•
•
ACPI Suspend Type
Select the ACPI Suspend Type : “S1 (POS)” or “S3 (STR)”.
If your expansion cards do not support the STR function, you must leave this field on “S1
(POS)” setting. STR (Suspend-to-RAM) is an energy-saving feature. It takes only a few
seconds to wake up the system and return H to its previous situation.
NOTE: This feature (STR) requires an ATX power supply with at least 720mA and 5V
standby power for the Advanced Configuration and Power Interface (ACPI)
functions. Otherwise, the system will fail to return from suspend mode.
•
PM Control by APM
When “Yes”, an Advanced Power Management device will be activated to enhance the Max.
Power Saving mode and stop the CPU internal clock.
42
BIOS SETUP
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes.
1. Suspend Mode
2. HDD Power Down
3. Doze Mode
There are three selections for Power Management. Two of them have fixed mode settings.
1. Min. Power Saving :
Minimum power management mode. Inactivity period is defined below:
Doze Mode = 1 Hour
Suspend Mode = 1 Hour.
2. Max. Power Saving :
Maximum power management mode. Inactivity period is defined below:
Doze Mode = 1 Min
Suspend Mode = 1 Min.
3. User Define :
Allows you to set each mode individually. Select the time-out period for each mode
shown above.
