38
BIOS SETUP
•
•
•
•
•
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33(66) implementation is possible only if your IDE hard drive can support it and
the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE
bus master driver). If both of your hard disk drive and your system software can support Ultra
DMA/33(66), select Auto to enable BIOS support.
•
•
•
•
•
USB Controller
Select Enabled if your system contains USB peripheral(s).
•
•
•
•
•
USB Keyboard Support
Select Enabled if you use a USB Keyboard.
•
Init Display First
This item allows you to decide whether to activate either the PCI Slot or the AGP first.
•
AC97 Audio / Modem
If you select Enabled, BIOS will detect whether you are using any audio/modem devices.
When an audio/modem device is detected, the onboard audio/modem controller will be
enabled. If you want to use your own audio/modem card, set these fields to Disabled. If not,
set these fields Enabled.
•
• •
•
•
IDE HDD Block Mode
Block Mode is also called Block Transfer, Multiple Commands, or Multiple Sector Read/
Write. If your IDE hard drive supports Block Mode (most new drives do), select Enabled for
automatic detection of the optimal number of Block Read/Write per sector the drive can
support.
•
•
•
•
•
Power On Function
- Password : Power On only if you key in the correct password.
- Hot Key : You can use the hot key to Power On the system.
- Mouse Left : Power On with the Mouse Left Button.
- Mouse Right : Power On with the Mouse Right Button.
All manuals and user guides at all-guides.com
