30
BIOS SETUP
stops and prompts you to take corrective action.
- All,But Diskette : If the BIOS detects any non-fatal error except floppy disk drive,
POST stops and prompts you to take corrective action.
- All,But Disk / Key : If the BIOS detects any non-fatal error except floppy disk drive
or keyboard, POST stops and prompts you to take corrective action.
•
Drive A / Drive B
Select the correct types of diskette drive(s) installed in the computer.
- None : No diskette drive installed
- 360K, 5.25 in. : 5-1/4 inch standard drive; 360 kilobyte capacity
- 1.2M, 5.25 in. : 5-1/4 inch high-density drive; 1.2 megabyte capacity
- 720K, 3.5 in. : 3-1/2 inch double-sided drive; 720 kilobyte capacity
- 1.44M, 3.5 in. : 3-1/2 inch double-sided drive; 1.44 megabyte capacity
- 2.88M, 3.5 in. : 3-1/2 inch double-sided drive; 2.88 megabyte capacity
•
Floppy Mode 3 Support
Support some particular Japanese floppy drives ( 3.5 inch drive with 1.2 MB capacity ).
•
Video
Select the type of primary video subsystem in your computer. The BIOS will detect the correct
video type automatically. The BIOS supports a secondary video subsystem, but do not select
it in this Setup.
- EGA/VGA : Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SEGA,
SVGA or PGA monitor adapters.
- CGA 40 : Color Graphics Adapter, powers up in 40-column mode.
- CGA 80 : Color Graphics Adapter, powers up in 80-column mode.
- MONO : Monochrome adapter, including high resolution.
•
Halt On
During the Power On Self Test (POST), the computer stops if the BIOS detects a hardware
error. You can set the BIOS to ignore certain errors during POST and continue the boot-up
process. The followings are the selections.
- All Errors : If the BIOS detects any non-fatal errors, POST stops and prompts you to
take corrective action.
- No Errors : POST does not stop for any error.
- All,But Keyboard : If the BIOS detects any non-fatal errors except keyboard, POST
All manuals and user guides at all-guides.com
