6
5. Safety Precautions
General Use
Unpack the device package with care.
Avoid exposing your StoreJet to extreme temperatures above 55
℃
, or below 5
℃
.
Do not drop your StoreJet.
Keep your StoreJet away from water or any other liquids.
Do not wipe or clean the exterior case with a damp/wet cloth.
Do not store your StoreJet in any of the following environments:
-
Direct sunlight.
-
Next to an air conditioner, electric heater or other heat sources.
-
In a car that is exposed in direct sunlight.
-
In an area with strong magnetic fields or near magnetic objects.
Backing Up Data
Transcend does NOT take any responsibility for data loss or damage during operation. If you intend
to store data on your StoreJet, we strongly advise that you regularly back up the data to a computer
or other storage devices.
If your computer is not booted while StoreJet 35T3 is connected, please disconnect the StoreJet
first and re-connect it after the computer reboots. Or you can refer to the computer's manual and
change the BIOS settings to instruct the computer to boot from a different device.
Transporting
Do not pack the StoreJet in luggage without proper protection. Other items in your luggage
may damage the drive during travel.
Avoid squeezing or pressing the StoreJet.
Do not place objects on top of your StoreJet.
Power
Do not use a USB hub to connect the StoreJet drive with your computer. The USB hub may not
be able to provide sufficient power for the drive.
Use only the USB cable that comes with the StoreJet. Ensure the cable you are using is in
good condition. NEVER use a cable that is frayed or damaged.
The StoreJet 35T3 should be powered from your home’s power outlet via the power adapter
included in the package. Do not connect the StoreJet 35T3 to any other power adapter.
Do not place objects on the USB cable. Make sure the cable is not located where it can be
tripped over or stepped on.
