background image

 

 

 

HD Video Card Series

 

 

 

 

  

 

     

 

4GB~16GB SDHC6 HD Video Card

 
 

Transcend Information Inc.

 

 

13

The product revision is composed of two Binary Coded Decimal (BCD) digits, four bits each, representing an “n.m” 
revision number. The “n” is the most significant nibble and “m” is the least significant nibble. 
As an example, the PRV binary value field for product revision “6.2” will be: 0110 0010 
 

• 

PSN 

 
The Serial Number is 32 bits of binary number. 

 

• 

MDT 

 
The manufacturing date composed of two hexadecimal digits, one is 8 bit representing the year(y) 
and the other is four bits representing the month(m). 
The “m” field [11:8] is the month code. 1 = January. 
The “y” field [19:12] is the year code. 0 = 2000. 
As an example, the binary value of the Date field for production date “April 2001” will be: 
00000001 0100. 
 

• 

CRC 

CRC7 checksum (7 bits). 
 

3. CSD Register 

Table 5-16 shows Definition of the CSD for the High Capacity SD Memory Card (CSD Version 2.0). The following 
sections describe the CSD fields and the relevant data types for the High Capacity SD Memory Card.  
CSD Version 2.0 is applied to only the High Capacity SD Memory Card. The field name in parenthesis is set to fixed 
value and indicates that the host is not necessary to refer these fields. The fixed values enables host, which refers to 
these fields, to keep compatibility to CSD Version 1.0. The Cell Type field is coded as follows: R = readable, W(1) = 
writable once, W = multiple writable. 

 

Summary of Contents for HD Video Card Series

























Reviews: