10
Specifications
Dimensions:
9-1/8"W x 12-1/4"D x 3-5/8"H
232mm x 311mm x 92mm
Capacity/Division:
0–4 lb x 0.1 oz, 4–30 lb x 0.5 oz
Power Source:
12VDC, 500 mA AC adapter, included
Accuracy:
Meets Class III NIST H-44, NTEP CC # 97-088
Operating Temp:
41 to 95°F (5 to 35°C)
Power Consumption:
250 mA, maximum
Display
16 x 2 Alpha, Liquid Crystal w/ LED backlight
Postal Rate Chip Change Instructions
NOTE: Turn the scale’s power switch to the OFF position prior to beginning
The SPS-30 PLUS postal rate information is contained in a pre-programmed memory device that
is mounted on a rate chip which plugs into the scale.
The rate chip is positioned on the underside of the postal scale. Remove the lid by removing the
two Phillips head screws. The rate chip is situated directly beneath the lid. To remove, gently
ease the rate chip from its socket using a small, flat screwdriver.
Remove plate to uncover rate prom
When inserting the new rate chip, ensure that the replacement is inserted correctly into the
socket. Insert the rate chip into place by pushing down gently. Replace the compartment lid and
your postal scale will be ready for use.
