background image

PC-150 Operation Manual

   

13

APPENDIX D: Warranty and Service Information

Transcell warrants that the PC-150 Digital Bench Scale will conform to written specifications,
drawings, and other descriptions made by the manufacturer, including any modifications thereof.
Transcell warrants the goods against faulty workmanship and defective materials. If any goods
fail to conform to these warranties, Transcell will, as its sole and exclusive liability hereunder,
repair or replace such goods if they are returned within the following warranty period:

Twelve (12) months from date of shipment from manufacturer.

These warranties are made upon the express condition that:

1) Transcell Technology, Inc. is given prompt written notice upon discovery by Buyer of such

non-conformity, with a detailed explanation of the alleged deficiencies;

2) Such goods are returned to the Transcell at the expense of the Buyer;

3) Examination of such goods by Transcell discloses that the nonconformity actually exists and

was not caused by accident, misuse, neglect, alteration, improper installation improper or un-
authorized repair, or improper testing, and

4) Such goods have not been modified, altered, or changed by any person other than the Tran-

scell or its duly authorized repair agents.

5) Transcell Technology, Inc. will have a reasonable time to repair or replace such goods.

THESE WARRANTIES EXCLUDE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL
OR WRITTEN, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. TRANSCELL WILL NOT IN ANY EVENT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

IN ACCEPTING THIS WARRANTY, THE PURCHASER OR BUYER AGREES TO WAIVE ANY
AND ALL OTHER CLAIMS FOR RIGHT TO WARRANTY FROM TRANSCELL TECHNOLOGY,
INC. SHOULD THE SELLER BE OTHER THAN TRANSCELL TECHNOLOGY, INC., THE
BUYER AGREES TO LOOK ONLY TO THE SELLER FOR WARRANTY CLAIM OR CLAIMS.

No terms, conditions, understanding, or agreements purporting to modify the terms of this war-
ranty shall have any legal effect unless made in writing and signed by a corporate officer of the
Transcell.

Summary of Contents for PC 150
















Reviews: