Transcell Technology EL 3000 Operation Manual Download Page 17

Warranty and Service Information 

 

Seller warrants that the EL 3000 Counting Scale will conform to written specifications, 
drawings, and other descriptions made by the manufacturer, including any modifications 
thereof. The Seller warrants the goods against faulty workmanship and defective materials. If 
any goods fail to conform to these warranties, Seller will, as its sole and exclusive liability 
hereunder, repair or replace such goods if they are returned within the following warranty 
period: 
 

Twelve (12) months from date of shipment from manufacturer.

 

 
These warranties are made upon the express condition that: 
 
1) Transcell Technology, Inc. is given prompt written notice upon discovery by Buyer of such 

non-conformity, with a detailed explanation of the alleged deficiencies; 

 
2)  Such goods are returned to the Seller at the expense of the Buyer; 
 
3)  Examination of such goods by Seller discloses that the nonconformity actually exists and was 

not caused by accident, misuse, neglect, alteration, improper installation improper or un-
authorized repair, or improper testing, and  

 
4)  Such goods have not been modified, altered, or changed by any person other than the Seller 

or its duly authorized repair agents. 

 
5)  Transcell Technology, Inc. will have a reasonable time to repair or replace such goods. 
 
THESE WARRANTIES EXCLUDE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL 
OR WRITTEN, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE. SELLER WILL NOT IN ANY EVENT BE LIABLE 
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. 
 
IN ACCEPTING THIS WARRANTY, THE PURCHASER OR BUYER AGREES TO WAIVE ANY 
AND ALL OTHER CLAIMS FOR RIGHT TO WARRANTY FROM TRANSCELL TECHNOLOGY, 
INC. SHOULD THE SELLER BE OTHER THAN TRANSCELL TECHNOLOGY, INC., THE 
BUYER AGREES TO LOOK ONLY TO THE SELLER FOR WARRANTY CLAIM OR CLAIMS. 
 
No terms, conditions, understanding, or agreements purporting to modify the terms of this war-
ranty shall have any legal effect unless made in writing and signed by a corporate officer of the 
Seller. 
 
 
 
 
 
 
 
 
 
 

 

 

EL 3000 Operating Manual

   

15 

Summary of Contents for EL 3000


















Reviews: