10. DEVICE CLEANING
10.1. General Recommendations
Prior to cleaning it is necessary
to disconnect the device from
the mains. Remove the plug
from the outlet, disconnect all
cables
Use soft cloth made of either
natural or synthetic fiber
exclusively. Avoid using cloth
made of stiff/hard fabric, this
could cause scratches on the
surface.
Apply the cleaner onto the cloth.
Mind not to apply the cleaner
directly onto the device.
Do not use aggressive cleaning
agents (e.g. solvents, chlorine
preparations, corrosive
chemicals, bleach)
Make sure that dust nor
liquid gets inside the
weighing system.
Do not use substances of
sharp structure or intended
for scrubbin
g
11.2. Cleaning Instructions
GLASS PANES AND COMPONENTS
can be cleaned using window cleaner.
WEIGHING PANS AND STAINLESS STEEL OR ALUMININUM COMPONETS
can be
cleaned using a cloth slightly soaked in a solution of water and gentle cleanser (e.g. soap or
dishwashing liquid)
OPERATION PANEL AND HOUSING
can be cleaned using a cloth slightly soaked in a
solution of water and gentle cleanser (e.g. soap or dishwashing liquid)
Dry sample leftovers can be removed using either a brush or handheld vacuum cleaner.
Clean componets can be dried using a soft cloth or dust-free paper towl, with this the
remaining moisture will be absorbed.
Install all the componets only when they are completely dry.
