TransAct Printrex 920, Operator'S Manual

Page: 5 / 56

100-TBD - Rev A _dp Page iii
Radio Frequency Interference Statement
This device compl ies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s) . Operation of the device is subject to
the following two conditions: (1) The device may not cause harmful interference,
and (2) The devices must accept any interference that may cause undesired
operation.
The manufacturer declares that this product conforms to the following
standards or other normative documents:
EN 301 489-1 V1.9.2 (2011-09) Electomagnetic compatibility and Radio
spectrum Maters (ERM); ElectroMagnetic Compatibility (EMC) standard
for radio equipment and services; Part 1: Common technical requirements
Safety: EN 60950-1:200 6 Safety of information technology equipment
including electrical business equipment, including amendments A1 2 :20 11
This unit has been tested and compl ies with limits for a Class A digital device
under Part 15 of the FCC Rules and Industry of Canada ICES-003 . These limits
are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense..
Changes or modifications not expressly approved by TransAct Technologies,
Inc. could void the user's authority to operate the equipment.
EN 301 489-3 V1.4.1 (2002-08) Electomagnetic compatibility and Radio
spectrum Maters (ERM); ElectroMagnetic Compatibility (EMC) standard
for radio equipment and services; Part 3: Specific conditions for Short-Range
Devices (SRD) operating on frequencies between 9 kHz and 40 GHz
EN 300 330-2 V1.5.1 (2010-02) Electomagnetic compatibility and Radio
spectrum Maters (ERM); Short-Range Devices (SRD); Radio equipment
in the frequency range 9 kHz to 25 MHz inductive loop system in the
frequency range 9 kHz and 30 MHz