Setting up the Printer
$
!
The Series 80PLUS Printer is designed to be placed on point-of-sale terminals,
counter tops, or any other flat, stable surface that can support the weight of
the printer (about 4 pounds or 1.8 kg). Please refer to the dimensions when
selecting the best possible location. Be aware of the environmental conditions
of the location where you place the printer. Generally, the environment in any
store is suitable for operating the printer.
"
♦
Width: 6.0 inches (152 mm)
♦
Length: 8.5 inches (216 mm)
♦
Height: 5.6 inches (142 mm)
♦
Approximate weight: 4 pounds (1.8 kg)
"
The printer will run at its best when stored and operated in an environment
that meets the following temperature and humidity conditions:
♦
Operating temperature: 0° to 40°C (32° to 104°F)
♦
Operating relative humidity: 10% to 90% (noncondensing)
Summary of Contents for ITHACA 80PLUS
