Making Measurement:
1.
Open the light plate & place 2 to 3 drops of the salt water on the prism.
2.
Close the Light Plate. Ensure the water is spread across the entire surface of
the Prism. There must not be any bubbles or dry spots.
3.
Wait for about 30 seconds, this is to allow the temperature compensation to
take place.
4.
Hold the meter in the direction of light source and look into the Eyepiece.
5.
Look at the left side scale, which is for sg measurement. The right side scale
is for salinity in % measurement.
6.
Take the reading from the scale on the line where the blue and white area
meets.
7.
Wipe dry the Light Plate and Prism with a soft lint-free clothe after each and
every test and before storing away.
8.
It is important to maintain the Light Plate and Prism dust and stain free in order
to have good repeatability measurement.
Precautions in Usage:
1.
Clean the instrument between each measurement and before storage with a
soft cloth. Residue of samples stained on the prism could damage the coating
on the prism.
2.
Do not measure with abrasive or corrosive chemicals. This will damage the
prism’s coating.
3.
Do not immerse the instrument in water. If the view inside the Eyepiece
becomes foggy, water has entered into the body. Call a qualified service
technician or contact your dealer.
4.
Do not clean the prism with thinner as this will remove the special coating on
the prism and damage the unit.
5.
Do not store the instrument in a damp environment. Store only in a cool and
dry environment.
6.
This is an optical instrument and requires careful handling and storage. With
care, this instrument will provide years of reliable service.
Making Measurement:
1.
Open the light plate & place 2 to 3 drops of the salt water on the prism.
2.
Close the Light Plate. Ensure the water is spread across the entire surface of
the Prism. There must not be any bubbles or dry spots.
3.
Wait for about 30 seconds, this is to allow the temperature compensation to
take place.
4.
Hold the meter in the direction of light source and look into the Eyepiece.
5.
Look at the left side scale, which is for sg measurement. The right side scale
is for salinity in % measurement.
6.
Take the reading from the scale on the line where the blue and white area
meets.
7.
Wipe dry the Light Plate and Prism with a soft lint-free clothe after each and
every test and before storing away.
8.
It is important to maintain the Light Plate and Prism dust and stain free in order
to have good repeatability measurement.
Precautions in Usage:
1.
Clean the instrument between each measurement and before storage with a
soft cloth. Residue of samples stained on the prism could damage the coating
on the prism.
2.
Do not measure with abrasive or corrosive chemicals. This will damage the
prism’s coating.
3.
Do not immerse the instrument in water. If the view inside the Eyepiece
becomes foggy, water has entered into the body. Call a qualified service
technician or contact your dealer.
4.
Do not clean the prism with thinner as this will remove the special coating on
the prism and damage the unit.
5.
Do not store the instrument in a damp environment. Store only in a cool and
dry environment.
6.
This is an optical instrument and requires careful handling and storage. With
care, this instrument will provide years of reliable service.
A Product of Singapore
www.transinstruments.com
A Product of Singapore
www.transinstruments.com
