Flash Pattern
Fault Type
Flashes 1 Time
Indicates charging complete, but battery is under charged. Battery voltage is
below minimum level required. This warning is provided after the rapid
charging stage is complete.
Fault Conditions
When the F or R charge status LED flashes
red
, a fault condition exists. There are three different flash
patterns, each indicating a specific type of fault. The flash patterns and fault conditions are as
follows:
Flashes 2 Times
Indicates battery contact is “open” and current is not passing through the
(+) and (-) contacts on the battery. This warning is provided after the initial
diagnostic stage is complete. Check charging pod to confirm compatibility
with battery.
Flashes 3 Times
Indicates over-current condition caused by battery short circuit. Have the
battery checked by a qualified technician. Do not attempt charging the
battery if a short circuit exists.
9