rev A
Trango Systems, Inc.
5
the leads for positive and negative voltages are attached correctly,
otherwise the unit will not function.
$
Channel DIP switch.
This switch controls the transmitter chan-
nel. Remember to change the receiver (either Eagle PLUS™ or Sting-
ray™) channel as well, since it is not automatically changed when
the transmitter channel is changed.
4
Move and adjust the orientation of the MTX-2500 and receiver un-
til the best picture is obtained. The best picture will be obtained
when orienting the MTX-2500 within the receiver antenna beam
width, unobstructed, as shown.
Receiver Operation
See your Stingray or Eagle PLUS documentation for proper use of video
receivers from Trango Systems, Inc.
Operational Hints
The MTX-2500 is factory-configured for operation on channel 1. The
standard transmitter is supplied with an omnidirectional (or 360°) an-
tenna that allows the receiver to be located in any direction relative to
the transmitter within a 45° beamwidth vertically. To obtain the best
picture quality and transmission distance, the following rules of thumb
should be followed:
•
Place the transmitter and receiver antennas above human and me-
chanical traffic but away from metallic objects.
•
Keep the transmission path as open as possible. Objects such as
walls, ceilings, and metallic objects near the transmission path can
reflect signals and may reduce the transmission distance.
60°
45°
