Trango Systems EAGLE PLUS Installation And Operating Instructions Manual Download Page 3

Copyright © 1999 Trango Systems, Inc.  All rights reserved.

3

C

ongratulations on choosing Trango Systems, Inc. to fulfill your wireless video needs.  Unpack

your system carefully.  If any items are missing, notify your sales representative.  If an item
appears to be damaged from shipment, replace it in its packing material and notify the shipper.

Save the packaging for further storage of the equipment.

Service:

If the unit ever needs repair service, contact Trango Systems customer service at (858)
653-3900 for return authorization and shipping instructions.

FCC Information:

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with these instructions, may cause harmful interference
to radio communications.  However, there is no guarantee that interference will not
occur in a particular installation.  If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to correct the interference by one of more of the following
measures:

1) Reorient the receiving antenna;
2) Increase the separation between the affected equipment and the receiver;
3) Connect the affected equipment to an outlet on a different circuit from that
     which the receiver is connected to;
4) Consult the dealer and/or experienced radio/TV technician for help.

VTX2400: # NCYVTX2500

IMPORTANT NOTE:
Intentional or unintentional changes or modifications not expressly approved by the
party responsible for compliance must not be made.  Any such modifications could void
the user’s authority to operate the equipment.

System Description:

The EAGLE PLUS Wireless Video System is a professional quality system designed for
sending composite NTSC or PAL video, audio, and alarm signals using 2.4 GHz wireless
technology.  The system is ideal for permanent or temporary video links due to its
portable nature and easy installation.  It is 

not

 designed for operation while in motion.

Summary of Contents for EAGLE PLUS






















Reviews: