Set the following:
Country Code - US-PTP-2
Wireless Profile - 802.11g+n
Channel Spectrum Width -
20/40 MHz
Channel - Auto
Transmit Power - Max
Mode - Access Point
ESSID - A600-2
(Note: This is the default
ESSID. You can change this
name if you’d like.)
Click
4
5
6
7
8
9
11
4
5
8
6
10
11
7
10
9
LT-9073-A Page 1 of 2
© Trango Systems • Phone: 858-391-0010 • Email: [email protected] • Web: trangosys.com, support.trangosys.com, store.trangosys.com
2.4 GHz
Omni Antennas
Installed
Altum AC
™
Quick Start Guide
2.4 GHz WiFi Access Point
Follow the steps in the Altum AC Quick Start Guide “Point-to-Point
Link Configuration” to setup a Altum AC link. You can find this on
the Trango support site http://support.trangosys.com.
Install two 2.4 GHz omni directional antennas to the
two N-Type connectors on the bottom of the Station.
Navigate to a web browser and enter the IP address for the Station. Our example in the “Point-to-Point Link Coniguration” Quick Staart
Guide is 192.168.1.20
Enter your Username and Password. The default Username is
admin
and Password is
trango
(case sensitive).
Log in to the radio by clicking
1
1
2
3
2
3
Navigate to
Network
>
Wifi
. In the first row that is labeled
click
1
2
3
1
2
3
N-Type Connectors
2.4 GHz Omni Antennas
Step 2 - Install the 2.4 GHz Omni Antennas
Step 1 - Set up a Point-to-Point Link
Step 3 - Login to the Station Unit
Step 4 - Edit the Station’s WiFi Settings
