22
TK 56460-19-OP-EN
Operating Instructions
HMI Control Panel Operation
The TriPac Envidia is operated using an HMI (Human Machine Interface)
Control Panel which is typically mounted on a wall in the truck cab sleeper
compartment.
Figure 7. HMI Control Panel
RCS1646
HMI Control Panel Display
The HMI is an easy to use control that allows the driver to select the desired
function of the system. It also provides feedback to the driver of alarms,
battery level and system status. The HMI has three selector knobs and a
battery monitor display. The HMI also contains an integral Cab Temperature
Sensor.
The driver can select these functions from the HMI:
•
System On/Off
•
Mode (Cool, Fan, Heat)
•
Desired Cab Temperature (Cooler or Warmer)
•
Fan Speed (OFF, Auto, Variable)
•
Driver Selectable Settings
When any setting change occurs, there will be a two second delay before the
controller recognizes the new setting. The Mode Icon will flash until mode is
confirmed by the Base Controller.
