16
TK 56460-19-OP-EN
Condenser and Receiver Drier
The air conditioning condenser is mounted on the back of the truck cab. It
contains a variable speed fan. The receiver/drier and the ambient
temperature sensor are integrated on the housing.
Figure 4.
Condenser and Receiver Drier
HMI Controller
The HMI controller is typically mounted in the bunk area. The HMI allows the
driver to select the desired function of the system. It also provides alarm,
battery level and system status feedback to the driver. The HMI has three
selector knobs and a battery monitor display. The HMI also contains an
integral Cab Temperature Sensor that helps control cab temperature when
the TriPac Envidia air conditioning system is operating.
Figure 5.
HMI Control Panel
RCS1646
