18-GF74D1-1R-EN
23
Table 16.
Downflow (continued)
5.
On both sides of the cabinet, remove the screws that hold the coil
support brackets and retain for later use. Seal the holes to
prevent air leakage.
6.
Rotate and lift the two coil support brackets to remove from front
slots in cabinet.
Figure 6.
All models
Figure 7.
All models
Left
Right
7.
Rotate the unit into the downflow orientation.
8.
Pre-drill two clearance holes in the cabinet at dimples located
below the location the screws were removed for the coil support
brackets. There is one hole per side. See location of holes
9.
Replace the center horizontal bracket removed in Step 3. Use the
screws retained from Step 3 to attach.
10. Place coil support brackets into the lower set of slots and rotate
into place. Push downward to lock into place.
11. Secure each bracket with a screw that were previously removed.
Figure 8.
All models