Installation
RT-SVX38C-EN
25
Space Temperature Averaging
(ReliaTel™ Only)
Space temperature averaging is accomplished by wiring a
number of remote sensors in a series/parallel circuit.
Using the BAYSENS016* or BAYSENS077*, at least four
sensors are required to accomplish space temperature
averaging. See
Figure 28, p. 26
.
•
Example #1 illustrates two series circuits with two
sensors in each circuit wired in parallel. The square of
any number of remote sensors is required.
•
Example #2 illustrates three sensors squared in a
series/parallel circuit. Using BAYSENS077*, two
sensors are required to accomplish space temperature
averaging.
•
Example #3 illustrates the circuit required for this
sensor.
Table 6, p. 28
lists the temperature versus
resistance coefficient for all sensors.
Figure 25.
ReliaTel™ conventional thermostat field
wiring diagrams
Figure 26.
ReliaTel options module
RTRM
Figure 27.
ReliaTel control customer low voltage routing
ReliaTel Conventional Wiring
Route field wiring as shown and
secure with 2 wire ties.
Refrigeration
Module
Communication
Interface
LTB
Summary of Contents for RT-SVX38C-EN
Page 26: ...Installation 26 RT SVX38C EN Figure 28 Examples...
Page 45: ......
Page 46: ......
Page 47: ......
