Maintenance
20
AMS-SVX03A-EN
Attention
Cleaning of air conditioning must be done with the unit stopped and its main power off,
•
otherwise the risk of electric shock may be resulted in.
Never wet the air conditioning, otherwise the risk of electric shock may be resulted in. Make
•
sure not fl ush the conditioner with water in any case.
Volatile liquids like thinner and gasoline may damage the appearance of air conditioning. (Its
•
enclosure could only be cleaned with soft dry cloth and wet cloth dipped with neutral wash
solution).
Cleaning of panel
Attention
Remove it before cleaning: Do not do cleaning with water hotter than 45
ņ
,
otherwise it may be discolored or distorted.
As shown in the fi gure below, apply force to slots at both panel sides in arrow direction to
1.
remove the panel.
Clean the panel with soft brush, water and neutral cleanser, followed the drying with water
2.
throw-off or in a cool place.
Reinstall the panel.
3.
As shown in the fi gure below, put the panel pillars at both sides into channels and middle rotor
shaft into the slots. Finally cover the panel according to the arrow direction and fi x it.
Cleaning of air strainer
Generally, the air strainer is expected to be cleaned every three months. In case of operation in
a dusty environment, its cleaning frequency shall be increased.
Remove the air strainer
1.
As shown in the fi gure, apply force to slots at both panel sides in arrow direction to open
the panel and pull the air strainer downwards to remove it.
Cleaning of the air strainer
2.
Generally, the strainer may be cleaned with dust remover or through water washing, and
may be washed in the warm water (below 45
ņ
) containing neutral cleanser if it is very
dirty (e.g. oil dirt), followed the drying in a cool place;
