10
UNT-IOM-6
This unit is intended for indoor use only. To protect the unit from
damage due to the elements and prevent it from possibly becoming a
contaminant source for IAQ problems, store the unit indoors. If indoor
storage is not possible, the Trane Company makes the following
provisions for outdoor storage:
1. Place the unit(s) on a dry surface or raised off the ground to assure
adequate air circulation beneath unit and to assure that no portion of
the unit contacts standing water at any time.
2. Cover the entire unit with a
canvas tarp
only.
Do not
use clear,
black or plastic tarps as they may cause excessive moisture conden-
sation and equipment damage.
Note:
Wet interior unit insulation can become an amplification site for
microbial growth (mold), which may cause odors and health-related
indoor air quality problems. If there is visable evidence of microbial
growth (mold) on the interior insulation, remove and replace the
insulation prior to operating the system. Refer to the Inspecting and
Cleaning the Internal Insulation section on page 123 for more
information.
Jobsite Storage