SetPoint
Pressing the "
SET
" button on the main screen, you enter in the screen shown below.
In this menu you can set the cold “
Chiller
” and the hot “
Recovery
” set point.
To change the value, highlight the set point to be changed using the arrow keys, press the
Set
button
to enable editing, take it to the desired value using the
UP
or
Down
buttons and press
Set
again to
confirm.
This screen also shows an indication of the state of activation of the functions
Energy Saving
and
Dynamic Set Point
.
During this operation, the “
Real Set
” label is displayed; if the
Energy Saving
or the
Dynamic Set
Point
is active, the “
Real Set
” is the set point value including the variation for
Energy Saving
or for
dynamic set; while the set point represents the real set when the
Energy Saving
or the
Dynamic Set
Point
are not active.
An example below is shown in the pictures below.
