Trane GKNE, Accompaniment To The Installation, Operation And Maintenance Manual

Page: 40 / 44

40 GKNE-SVX001B-EN
Equipment Start-Up
Customer:__________________________________________ Job Name & Number:______________________________________
PRE-INSPECTION INFORMATION
With power and gas off.
Type of Equip: Unit Heater
Serial Number_______________________________________ Model Number_____________________________________
Name Plate Voltage:___________________________________ Name Plate Amperage:_______________________________
Type of Gas: Natural LP Tank Capacity________ lbs. Rating: __________ BTU @ _________ °F
_______ kg ______________kw @ _____________ °C

Are all panels, doors, vent caps in place?

Has the unit suffered any external damage? Damage ______________________________

Does the gas piping and electric wiring appear to be installed in a professional manner?

Has the gas and electric been inspected by the local authority having jurisdiction?

Is the gas supply properly sized for the equipment?

Were the installation instructions followed when the equipment was installed?

Have all field installed controls been installed?

Do you understand all the controls on this equipment? If not, contact your wholesaler or rep.
(DO NOT START this equipment unless you fully understand the controls.)
GENERAL
With power and gas off.
GAS HEATING
With power and gas on.

Make certain all packing has been removed.

Inlet gas pressure. ____ in. W.C. or ____ kPa

Tighten all electrical terminals and connections.

Burner ignition.

Check all fans & blowers for free movement.

Manifold gas pressure. ____ in. W.C. or ____ kPa

Check all controls for proper settings.

Cycle firestat and/or freezestat.

Check electronic modulation. Set at: __________
FAN With power and gas off.

Entering air temp. _____ °F or ____ °C

Check voltage. L1_____ L2_____ L3_____

Discharge air temp. (high fire) ____ °F. or ____ °C

Check rotation of main blower(s).

External static pressure _________ in. W.C.

Check motor amps. L1_____ L2_____ L3_____

Cycle by thermostat or operating control.

Combustion readings:

Carbon Monoxide:______ PPM

Carbon Dioxide:________%
Remarks:_____________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________