CVGF-SVN02B-E4
56
Installation:
Electrical
All field-installed wiring must
conform to National Electric
Code (NEC) guidelines, as well
as to any applicable state and
local codes. Be sure to satisfy
proper equipment grounding
requirements per NEC.
All field-installed wiring must be
checked for proper terminations,
and for possible shorts or
grounds.
Do not modify or cut enclosure
to provide electrical access.
Removable panels have been
provided for this purpose.
Modify these panels only; away
from enclosure. Refer to
installation information shipped
with the starter or submittal
drawings.
CAUTION
TO AVOID DAMAGE TO
STARTER COMPONENTS,
remove debris inside the starter
panel. Failure to do so may
cause an electrical short that
seriously damages the starter
components.
WARNING!
Rotating Components!
During installation, testing,
servicing and troubleshooting of
this product it may be necessary
to measure the speed of
rotating components. Have a
qualified or licensed service
individual who has been
properly trained in handling
exposed rotating components,
perform these tasks. Failure to
follow all safety precautions
when exposed to rotating
components could result in
death or serious injury.
As you review this manual,
along with the wiring
instructions presented in this
section, keep in mind that:
General Requirements
WARNING!
Live Electrical
Components!
During installation, testing,
servicing and troubleshooting of
this product, it may be
necessary to work with live
electrical components. Have a
qualified licensed electrician or
other individual who has been
properly trained in handling live
electrical components perform
these tasks. Failure to follow all
electrical safety precautions
when exposed to live electrical
components could result in
death or serious injury.
