Trane CleanEffects Air Filtration System User'S Information Manual Download Page 8

Page: 8 / 10

Numbers in [brackets] are for 50 Hz international systems.

32-5038-06

User’s Information

CHANGING THE SETTINGS

While in the SET-UP mode, press the POWER button

once to begin cycling through the various setting

options in the following order:

PRE-FILTER Cleaning Interval
Setting (Figure 20)

One or more of the GREEN LED lights will illuminate.
To change the reminder interval time, press the RESET
button until the desired setting is indicated, and then
press the POWER button again. Choices are in months
of "run time", not a calendar month.

COLLECTION CELLS Cleaning
Interval Setting (Figure 21)

One or more of the YELLOW LED lights will illuminate.
To change the reminder interval time, press the RESET
button until the desired setting is indicated, and then
press the POWER button again.

FIELD CHARGER Power Level
Setting (Figure 22)

One or more of the RED LED lights will illuminate. To
change the power level setting, press the RESET button
until the desired setting is indicated.

To save your new settings and exit the SET-UP mode,
press and hold BOTH the Power and filter RESET
buttons for a minimum of 5 [6] seconds.

CLEAN

DIRTY

CLEAN

DIRTY

CLEAN

DIRTY

One Month

[5 Weeks]

Two Months*

[10 Weeks]

Three Months

[15 Weeks]

Fig. 20

CLEAN

DIRTY

CLEAN

DIRTY

CLEAN

DIRTY

CLEAN

DIRTY

Two Months

[10 Weeks]

Four Months

[20 Weeks]

Six Months*

[31 Weeks]

Nine Months

[46 Weeks]

Fig. 21

CLEAN

DIRTY

CLEAN

DIRTY

CLEAN

DIRTY

Minimum

Medium

Maximum*

Fig. 22

* Factory settings

Summary of Contents for CleanEffects Air Filtration System











Search results

Summary of Contents for CleanEffects Air Filtration System

Reviews:

Brands by name

Popular brands

Trane CleanEffects Air Filtration System, User'S Information Manual

Search results

Summary of Contents for CleanEffects Air Filtration System

Reviews:

Brands by name

Popular brands