Page 5
INSTALLER'S GUIDE
Hot
W
ate
r
Out
Hot
W
ate
r
In
C
US
ELE
CTR
ICA
L S
AFE
TY
NRT
L L
IST
ED
MET
UL
1995
CAN/CSA-
C22
.2 No
. 23
6
E21
236
5
STEP 2
- Place hydronic coil on top of the air handler
cabinet.
1. Flip coil over so the gasket is on the bottom and the
supply side flanges are facing up.
2. Set the coil on top of the air handler.
3. Align the coil with the air handler case.
Section 4. Install Hydronic Coil
STEP 1
- Place the hydronic coil with the supply side
facing down. Apply gasket material onto the coil
flanges. On the front flange, the gasket material must
be at the inner edge to create an airtight seal.
Gasket
Place gasket material
on the inner edge of
front side flange
Hot W
ater
Out
Hot W
ater
In
C
US
ELECT
RICAL
SAFET
Y
NRT
L LIST
ED
MET
UL 1995
CAN/C
SA-
C22.2 N
o. 23
6
E212365
Hot W
ater
Out
Hot W
ater
In
C
US
ELECT
RICAL
SAFET
Y
NRTL LI
STED
MET
UL 1995
CAN/CSA-C22.2 No. 23
6
E212365
STEP 3
- Wrap the coil attachment flange around the
air handler and coil. It should have equal amounts of
material covering the coil and air handler cabinet.
1. Take the attachment flange and wrap it around the air
handler and coil.
2. Equal amounts of material should cover the coil and air
handler.
Supply Side
Supply Side