Trane BAYDMPR310 Series, Installation Manual

Page: 8 / 12

8 RT-SVN041B-EN
BAYDMPR311*
1. Open the unit disconnect switch.
2. Remove screws securing the filter access door and outside air panel
to the unit. Do not throw out the screws; they will be used in Step 3.
3. Secure the hood and damper panel to the unit outside air panel with 4
screws. (Remaining screws used in Step 2.)
4. Adjust the damper blade to the desired position setting.
5. Install the filter/mist eliminator into the fresh air hood using the
spring hinge to hold it in place, as illustrated in Figure 2, p. 8 .
6. Close the unit disconnect switch.
Figure 2. BAYDMPR311* damper assembly
Hood and Panel
Ship Attached
Mist Eliminator
Hinged Filter
Access
Manual Position
Settings
N No otte e:: The filter/mist eliminator can be taken out for cleaning by bending the
spring hinge.
IIn nsstta alllla attiio on n