Trane BAYDMPR310 Series, Installation Manual

Page: 7 / 12

RT-SVN041B-EN 7
Installation
BAYDMPR310*
1. Open the unit disconnect switch.
2. Remove screws securing the filter access door and outside air panel
to the unit. Do not throw out the screws; they will be used in Step 4.
3. Connect the provided wiring harness to the 12-pin plug in the R/A
section.
4. Secure the hood and damper panel to the unit outside air panel with 4
screws. (Remaining screws to be used in Step 2.)
5. Install the filter/mist eliminator into the fresh air hood using the
spring hinge to hold it in place, as illustrated in Figure 1, p. 7 .
6. Close the unit disconnect switch.
Figure 1. BAYDMPR310* damper assembly
Mist Eliminator
Hood and Panel
Ship Attached
Hinged Filter
Access
Motor Housing
With 2-Position Motor
N No otte e:: The filter/mist eliminator can be taken out for cleaning by bending the
spring hinge.