18
AFDR-SVN001D-EN
Pre-Installation
Required Tools
Normal service tools are required to perform the majority
of the work. A service technician with a well stocked tool
chest should have the right tools to perform the job. In
addition to the normal service tools and hardware, the
following is a partial list of specific field supplied
hardware/software components and special tools that are
also required to perform the display retrofit:
•
RS-232 male DB9 to female DB9 pin to pin serial cable
to connect the DynaView™ to a PC or laptop computer
Note:
–
The cable must NOT be a “null-modem” cable.
–
The cable must be less than 50 feet in length.
•
Type A to Type B USB cable to connect the Tracer™
UC800 controller to a PC or laptop computer
•
A PC or laptop computer equipped with the following:
–
KestrelView™ service software, version 14.0 or
newer
–
Tracer TU service software, version 9.0.322 or
newer
–
RTHD UC800 firmware build 3.03 or later (refer to
“Preparing Tracer TU on the Service Computer,”
p. 26
•
South pole magnet screwdriver (TOL01343)
•
Electronics vacuum
•
Drill
•
3/16-in. drill bit
•
3/8-in. drill bit for display arm
•
2.5-in hole saw (close mount kit only)
•
Phillips screwdriver
•
Wrench for fastening the bolts for the panel
•
Wire cutter for large and small gage wire
•
Vacuum pump
•
Oil pump
•
Impact drill for concrete
Parts
Table 2.
Components — close mount 460 volts
Kit Part Number
Mnemonic
Part Number
Description
QTY
Close Mount Components
RNG02318
X13640734010
Choke Core M-116
5
531405110100
Core Support Bracket
1
531405470100
Buss Bar, Formed (for motor connection)
2
531405480100
Buss Bar, Straight (for motor connection)
1
BRD02944
X13650733060
Dual Relay output Ref 1A8 (latest revision)
1
HLD00579
X13260721020
Relay, 4PDT, 120VAC, 8amps
2
RAL01142
X13260722010
Relay Socket, 4PDT, Din rail mount
2
X13500224070
Din rail 4inch
1
X13491363010
Din Rail End Stop
4
127500010001
507117910001
Strut Channel, 1.625"x 1.625"x 5ft (black color)
1
507117920001
Strut Channel Base, 4"X6” (black color)
1
507117930001
Strut Channel L Bracket
1
507117960001
.75in conduit connector 90 degree
1
507117970001
.75 IN CONDUIT CONNECTOR STRAIGHT
1
X19080029040
0.75in conduit - AFD/relay signal wires
20 ft
X19010309470
single conductor cable - 16awg UL 1230 blk
125 ft
CAB01534
X19051625030
Global harness Female to Amp connector 78.74in
1
CAB01153
X19051624030
Global harness Male to Amp connector 78.74in
1
CAB01150
X19051623020
Extension Harness - 78.74inch
1
X39002507010
Label, Warning (AFD)
1
507117810001
Label, Nameplate
1
AFDR-SVN001*-EN
KIT IOM (supplied by Trane)
1
507117830001
Schematics Printed on mylar
1
BAS-SVX54*-EN
Drive IOM
1
507118200001
AFD Label
1
X39003759010
Label, Technical support
1
507118300001
Motor Terminal Shield
1
