TK 61738-2-OP-EN
55
Switching from Electric to Diesel Operation
Diesel engine preheats and starts are automatic in both Continuous Mode
and Cycle Sentry Mode. The engine will preheat and start as required when
the unit is turned on. The engine preheat and start will be delayed in Cycle
Sentry mode if there is no current need for the engine to run.
N
No
otte
e:: If the unit is equipped with optional Electric Standby there may be
some additional prompts before the engine will start. Reefer to
“Electric Operation” for details.
C
CA
AU
UT
TIIO
ON
N
R
Riisskk o
off IIn
njju
urry
y!!
The engine may start automatically any time the unit is turned on.
The unit can be manually switched to Diesel Mode while operating in Electric
Mode.
To manually switch to Diesel Mode:
1. Press the ACCEPT/ENTER Key to enter the Main Menu and scroll to the
diesel engine icon and press the accept key.
•
HMI will display “PROGRAMMING DIESEL OPERATION”, “DIESEL
ENGINE STARTING”.
•
When diesel engine is running, the HMI will display “DIESEL ENGINE IS
RUNNING” screen for 3 seconds and light diesel icon in dashboard.
