6. Infuser
The 61644/100, 61644/104, 61644/106, 61644/070, 61644/074,
61644/076, 61644/050, 61644/054, 61644/056, 61644/030, 61644/034,
and 61644/036 thermal carafe dispensers include an infuser for tea.
Glass container replacement instructions:
• Loosen the glass container seal adjustment (turn it counter-clo-
ckwise);
• Loosen the beverage dispenser base (turn it counter-clockwise);
• If the glass container is broken, remove the glass shards carefully
wearing protective goggles and gloves. Identify and discard the
glass shards to prevent injuries to third parties who may handle this
product;
• Wash the thermal carafe thoroughly with running water to remove
all glass residue;
• Using extreme care and protective equipment, grab the new glass
container and slide it into the body (do not hit the glass container);
• Replace and tighten the beverage dispenser base;
• Softly screw in the seal adjustment;
• Ensure the glass is well centered in the top part, and then tighten
the seal adjustment;
• Test the thermal efficiency by filling the beverage dispenser with
boiling or cold water and close the lid. After 3 hours, check whether
the water is still at the desired temperature.
Tips for use:
• Add your preferred tea to the infuser
and attach it to the lid on the mouth
of the thermal carafe dispenser; close
the lid;
• To loosen, turn counter-clockwise;
• To tighten, turn clockwise.
For cleaning with each use of the infuser:
Remove contents from the inside of the
infuser and rinse well with clean water.
7. Warranty
The thermal carafe dispenser with glass container has a 1-year warranty.
This warranty only covers manufacturing defects.
The warranty does not cover problems caused by misuse, inadequate
use, or non-compliance with the guidelines recommended by this
manual.
