DEC SCANNER - Quick Start Guide
ASSEMBLY INSTRUCTIONS
Thank you for selecting the Dec Scanner instrument from Tramex.
3.
To insert the telescopic handle:
Fully open the flip-lock mechanism
Extend the lower part of the handle
Insert the threaded end into the
Base Unit and turn clockwise until
tight and secure.
4.
Ensure the ‘arrow label’ is centered
for optimal infrared communication
between the Base Unit and Control
Panel Meter. Close and lock the
flip-lock.
5.
Adjust the hand piece to
the desired left-hand or
right-hand position.
6.
Clip the Control Panel Meter
onto the meter bracket.
The Tramex Dec Scanner is a non-destructive impedance moisture scanner designed for
detecting and evaluating moisture conditions in roofing and waterproofing systems. The
Dec Scanner has 3 ranges of sensitivity to enable the surveying of a variety of roof types
and roofing depths, and is equipped to detect moisture in the majority of roofing and
waterproofing systems.
1.
Remove the Base Unit from
the carry case using the grab
handles.
2.
Check the tightness of the 8
electrode mat retaining screw
fasteners.
Distributed by:
ABQ Industrial LP USA
Tel:
+1 (281) 516-9292 / (888) 275-5772
eFax:
+1 (866) 234-0451
Web:
http
s
://www.abqindustrial.net
E-mail:
