Trakm8 dogcam Bullet HD2 Manual Download Page 9

RoadHawk, c/o Trakm8

Unit 9B, Callywith Gate Ind Est, 

Bodmin, PL31 2RQ

Tel. 01208 269 159

Web. www.roadhawk.co.uk

User Guide: Specification

Sensor: 5 Mega Pixel
Resolution: 1920 x 1080 (30, 25fps) - 1280 x 720 (60, 50fps)
Scan type: Progressive
Video Encoding: H.264 .MOV Files
Bit Rate: Up to 12mb/s in high quality mode
Power Supply: Embedded 660mAh Li-Polymer Battery
Battery Life: 60 to 90 mins record time
Power Consumption: <1.5w
Memory: Up to 32GB MicroSD Card Class 6 or better
Lens: 6 element glass lens
Field of View: 135 degrees at 720p
Working Temp: -10C to +55C
Storage Temp: -20C to +60C
Waterproof Depth: 10m MAX
Laser: Class 2 Single Laser <1w
Dimensions: 84mm (l) x 23mm (dia)
Weight: 62g
USB: 2.0 (high speed)
Operating System: Win 8 / WIn7 / WinXP / Vista / Max OS 10.7 or better
1080p/30fps @ 12 Mbit/s data rate,1GB memory can record 10 minutes of video.
720p/60 @ 12 Mbit/s data rate, 1GB memory can record 12 minutes of video.

User Guide: Laser Warning

 

Your camera has a class 2 red laser.
When you turn the camera on, it will fire the laser from the front lens.

WARNING:

Never look in to the laser beam.
Never point the laser at anyone’s face.
Never point the laser at road traffic or aircraft.
Never point the laser at animals.
The laser function can be disabled in the configuration software.
If you are using the camera in or on a vehicle on a public road then you should disable the laser.

MA
Y16004

Summary of Contents for dogcam Bullet HD2











Reviews: