TRAK Machine Tools
Site Preparation Guide
TRAK DPMRX5
F16467-46 Rev 062518
Page 2 of 4
DPMRX5 Overall Dimensions
G
Height of table from bottom of bed
40”
H
Maximum distance from spindle nose to table
25.8125”
I
Height of machine from bottom of bed to top of column cover
84.75”
J
Maximum height of machine from bottom of bed to top of Z-axis
motor
87.5”
K
Width of machine (including table tray)
94.125”
L
Length of machine with electrical cabinet closed
82.5”
M
Maximum height of machine from bottom of leveling pads to top of
spindle motor with the head all the way up
102”
N
Spindle center to column face
20.5”
Note:
Removing the z-axis motor, z-axis motor
cover, resistor housing, resistor housing lid, and
unscrewing the top resistor from its bracket and
placing it to the side results in a height of
80.4375” from the bottom of base to the top of
the Z-Axis ball screw. With the head all the way
down, this is the minimum clearance needed to
move the machine through doors.
